PlatSil® 73-60 Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a blue, Shore A60 rubber. This is a pourable rubber, but it can be easily thickened with PlatThix Liquid Thickener or Fumed Silica for brush-on application.

PlatSil® 73-60 has been tested by an independent laboratory and was found to comply with 21 CFR 177.2600 (as published in the Code of Federal Regulations) for rubber articles intended for repeated use food contact surfaces when accurately measured, thoroughly mixed, and fully cured.

Technical Specifications

• Mix Ratio by Weight: 1A:10B
• Shore Hardness: A60
• Pour Time: 45 min.
• Demold Time: 16 hr.
• Cured Color: Blue
• Mixed Viscosity: 40,000 cP
• Specific Volume: 21.3 in³/lb
• Specific Gravity: 1.3
• Elongation: 202 %
• Tensile Strength: 537 psi
• Die B Tear Strength: 113 pli
• Die T Tear Strength: 45 pli
• Notes: Shake or Stir Part A before use.
• Cure Inhibition: Contamination from sulfur (e.g., sulfur-based clay), amines, tin compounds, cured polyester resin, some paints and some silicone rubbers may inhibit surface cure of platinum-cured rubbers.

FOR INDUSTRIAL/PROFESSIONAL USE ONLY.